| Specification | Description |
|---|---|
| Capacity external | 11.81 |
| Module Range | 0,3,6 MM |
| Pressure Angle (alpha) | 40/14 Deg. Max/Min |
| Helix Angle(beta) | 30Deg. Max Left or Right |
| Work Piece Dia. | 180/5 MM Max/Min |
| Workpiece length | 1000 MM Max |
| Gear Teeth Width | 120 MM Max ** See Below |
| Shaft Type Work Piece The Max Honeable Tooth | With Depends on the axial |
| Of the Teeth on the Shaft**** | |
| Work Piece Weight | |
| Externally Toothed, Between Centers | 20 KG |
| Externally Toothed, cantilevered | 20 KG |
| Internally Toothed, Incl Clamping Chuck | 50 KG |
| Honeing Stone Measurements | |
| External Dia | 300MM Max / Option 160MM |
| Honeing Stone Widths | 24/30/40/50/60 MM |
| Internal Dia | 220 MM Min |
| Axis Crossing Angle | |
| A- Axis | Max +/- 30 Deg. |
| Pivoting Angle B-Axis | Max +/- 10 Deg. |
| Feed travelX Axis | Max 160 MM |
| Longitudinal Travel Z Axis | Max 600 MM |
| Headstock and Tailstock | |
| Headstock | Spindle receptacle cone Morse* |
| Taper Morse cone MK5 | |
| Cone: | Adustable Arbor or Retractable |
| Center morse Cone MK 5 | |
| Clamping Cylinder Length | 30 or 60 MM |
| Tailstock | Barrel Receptacle Cone MK 5 |
| Cone for Rotating Center | Morse Cone MK-5 |
| Stroke of Barrel | Stepless up to 60 MM |
| Clamping Force of barrel | Stepless 300 to 1200 N |
| Process Data : | |
| Process data | Axis A and B |
| Swivel Drive A Axis | Rapid Motion 54,5 Deg /S |
| Resolution 2290 incr/deg | |
| Swivel Drive B Axis | Rapid Motion 12,2 Deg /S |
| Resolution 10260 incr/deg | |
| Crossw Slide X axis | Cams -140/+20 |
| Speed | 5000 MM/Min |
| Rapid Motion | 8000 MM/MIN |
| Resolution | 0.0005 MM |
| Process Data Axis C1 and C2 | |
| Honing Stone C1 Axis | RPM Stepless 0-500 1/Min |
| Rpm ramping Speed | On / OFF 3-10 S |
| Exactness of Positioning Unit | 0.003 Deg |
| Work Piece C2 Axis | |
| RPM Ramping Speed | On / OFF 3-10 S |
| Positioning RPM | 6/1 Min |
| Compressed Air | |
| Compressed Air Connection | 9 MM Conn. Nipple |
| Pressure | 4-6 Bars |
| Consumption | 3/1 Min |
| Overall measurements and Work Area | |
| Machine Dimensions | 2410 x 2300 x 2465 MM |
| Required Floor Space | 4600 x 4600 MM |
| Height from Ground | 1140 MM |
| From Work Table | 220 MM |
| Machine Weights | |
| Machine Packed | 4500 KG |
| Machine Ready for Operation | 4000 KG |
| Honeing Oil Tank | Empty 180 KG |
| Honeing Oil Filter | Empty 25 KG |
| Hydraulic Unit | Empty 50 KG |
| Lubrication Unit II | Empty 30 KG |
| Control Cabinet Cooling Unit | 50 KG |
| Oil Filter mist unit | 35 KG |
| Swiveling Control panel | 80 Kg |
Cutting Edge Machine Tool Sales Inc.
4124 MacKenzie Court NE # 300
St. Michael, MN 55376
763-497-2086
763-497-1802
sales@cuttingedgemachinetools.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers