Kitamura Mycenter 2XI Vertical Machining Center 2 APC
Stock Number: 1516
Kitamura Mycenter 2 XI
Age: 2000
Condition: Good
This machine is available for demonstration under power at your convenience.
Click to view larger photo
Request a quote on stock# 1516
| Specification | Description |
|---|
| Approximate Machine Age: | 2000 |
| Pallet Size: | |
| Pallet Load | 660 LBS |
| Pallet Change Time | SEC. |
| X-Axis Table Travel: | |
| Y-Axis Saddle Travel: | |
| Z-Axis Spindle Head Travel: | |
| Maximum Distance Spindle To Table: | |
| Rapid Traverse Rate: | X & Y & Z Axis 1969 IPM |
| Spindle Taper: | CT-40 |
| Spindle Speeds: | 10,000 RPM |
| Spindle Drive Motor: | 15 HP |
| Automatic Tool Changer: | 30 Positions |
| Maximum Tool Diameter: | |
| Maximum Tool Length: | |
| Maximum Tool Weight: | |
| Tool Change time Tool to Tool | 1.3 Sec |
| Tool Change time | 3.2 SEC. |
| Approximate Dimensions: | |
| Machine Weight | |
Equipped With:
EQUIPPED WITH:
Fanuc 16i-Ma CNC Control
Two Speed Gearbox
HPCC (High Precision Contour Control)
RS 232 Port Interface
Rigid tapping
Coolant Thru Spindle Plumbed only (no Pump)
Flood Coolant System,
manual Pulse Generator and remote jog handle
External Lift up Type External Chip Conveyor
Daikin Spindle Chiller (Oil Cooling Sys)
Machine is under power and in service.
All available Books and Manuals
2 pallet, Pallet changer
Chip Conveyor
Spindle cut hours 11,101
This machine is under power and ready to be inspected
Cutting Edge Machine Tool Sales
4124 MacKenzie CT NE # 300
Saint Michael, Mn 55376
763-497-2086
763-497-1802
sales@cuttingedgemachinetools.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com
